10/100 PoE Power over Ethernet Injector 48V/30W

В наявності
Power your individual PoE-capable devices with this multi-voltage injector
The POEINJ100 10/100 Mbps PoE Power over Ethernet Injector with 48V Output converts standard 90-260V/AC power into low-voltage DC power that can run over existing Cat5 (or better) network cable to power IEEE 802.3at compliant network accessories. The Power over Ethernet injector device also features PoE awareness, to verify whether the device receiving power is IEEE 802.3at compliant. If the device is not compliant, only data will be sent through the LAN cable, protecting your device from damage. By adding the POEINJ100 to your existing network setup, installing devices such as Wireless Access Points(WAPs) and IP cameras can be easily accomplished where electrical wall outlets may not be available, without the hassle or expense of running new electrical wiring. Backed by a 2-year warranty and free lifetime technical support.
The Advantage
- High powered 30W injection allows for longer cable runs that will still provide full power to your PoE devices
- Use existing standard Cat5/5e/6 Ethernet cabling to deliver both power and data, allowing for remote equipment installs in locations where it was previously impossible
- Sturdy steel construction provides durability in harsh environments
LED indicators:
Cabling technology:
10BaseT, 100BaseTX
Compliance industry standards:
IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at
Operating relative humidity (H-H):
10 - 90%
Operating temperature (T-T):
0 - 40 °C
Storage temperature (T-T):
-20 - 85 °C
Ethernet LAN (RJ-45) ports:
Input current:
Input frequency:
Input voltage:
110 - 240
Power over Ethernet (PoE):
48 V
Dimensions (WxDxH):
75 x 102 x 23 mm
Package height:
6.5 cm
Package width:
13 cm
192 g