Seagate Desktop HDD 500GB 3.5" SATA II

$407.00
ST3500841AS
En stock
+
Set CMOS hard drive setup to Auto-Detect with LBA mode enabled.

INT13 Extensions and LBA mode in BIOS and FAT32 or NTFS-based
file systems are required to acheive full capacity. FAT32 file
system can create single partitions and logical drives up to 2TB.

Windows XP Service Pack 1 or Windows 2000 Service Pack 3 with
48-bit LBA Address drivers are required for native support of
ATA (IDE) disc drives greater than 137GB.

Windows 98, Windows Millennium and Windows NT 4.x all have 137GB
native limitations supporting ATA (IDE) disc drives. Third-party
device drivers may be available from motherboard or host adapter
manufacturers for these legacy Windows operating systems.

Already low-level formatted at the factory.
Average latency:
4.16 ms
Cylinders:
16383
Device type:
HDD
Drive device, buffer size:
8 MB
Hard disk number of heads:
16
Hard drive capacity:
500 GB
Hard drive interface:
Serial ATA II
Hard drive size:
3.5"
Hard drive speed:
7200 RPM
Read seek:
8.2 ms
Start/stop cycles:
50000
Write seek:
9 ms
Non-operating altitude:
-60.96 - 12192 m
Non-operating shock:
300 G
Operating altitude:
-60.96 - 3048 m
Operating relative humidity (H-H):
5 - 90%
Operating shock:
63 G
Operating temperature (T-T):
0 - 60 °C
Storage relative humidity (H-H):
5 - 95%
Storage temperature (T-T):
-40 - 70 °C
Drive devices burst data transfer rate (DMA):
2
Drive devices burst data transfer rate (PIO):
4
Drive devices burst data transfer rate (Ultra DMA):
5
Start-up current:
2.6 A
Depth:
14.7 cm
Height:
2.61 cm
Weight:
710 g
Width:
10.2 cm

At the same price!

3M 2028-NB
82424
$411.00
3M 2028-P
82358
$427.00
3M 220W UHB 2000 Hour
LKX66
$392.00